Was using my saw in my garage and that interrupted power for that area of the house and when I went to try to pop the circuit breaker I also tripped the circuit breaker for the computer room.
After power was restored to the computer room the configuration on my second router seemed hosed so I had to end up resetting it back to factory defaults and then set it all up again. I had to change the local ip.address of the router so it would not conflict with my other router since I have two LAN's and two separate static ip.addresses.
I also had some processor and NIC issues with my music server. Now I have to wait for the Music Server software to initialize and then check the play lists and allow that to re-sync and make sure I have the appropriate ports forwarded for the music.
Leave a comment